Length Counter SD-12
₴5 400The counters are designed to measure the length of various long flat products, such as film, conveyor belt, paper, etc.
The measurement error is no more than ±0.1%, adjustable by the manufacturer ±0.01%.
Showing 25–36 of 44 results
-
-
Machine for rubbing in low wax RSP-4/400
₴310 000It is intended for rubbing oil wax into wooden blanks with a maximum thickness of up to 60 mm. It is used in board finishing lines, including after SD-type aging machines.
-
Machine for rubbing oil wax RS-3
₴128 430It is intended for rubbing oil wax into wooden blanks with a maximum thickness of up to 60 mm. It is used in board finishing lines, including after aging machines of the SSD type. Functionally, it consists of a base with a conveyor feed of the blank, 3 height-adjustable units with cylindrical brushes. The 1st and 2nd brushes are located at an angle of 200
-
Metal brush
₴3 000Metal brush Metal brush is a tool designed for mechanical cleaning, grinding, or removing dirt from various surfaces. It is used in a variety of industries, including mechanical engineering, metalworking, construction, and home and auto service work. The main types of metal brushes: Round brush: Used for installation on grinding and drilling machines. It is…
-
Press-clamp APV-300-15-5
₴132 090The APV-300/450/600 longitudinal wood splicing press is a modification of the PV model.
Additional functionality of this model is provided by:
– automatic lifting mechanism of the stop bar
– mechanism for pushing the finished workpiece out of the working area. -
Press-clamp BVU
₴157 300The BVU type press clamps are a full-size modification of the VU type clamps and are a reversible drum structure on the longitudinal axis, combining 8 or 12 VU type planes. They are designed for high-performance gluing of furniture boards simultaneously on 3 or 4 planes, which allows gluing up to 0.5 m3 of the workpiece per drum revolution (approx. 30 min.). The rotation of the structure occurs using a motor-reducer with reversible control.
-
Press-clamp PV-300
₴54 270The PV-300 type press clamps are designed for joining pre-studded workpieces of various lengths. They are equipped with upper and side clamps that align and hold the workpiece. There are 2 modifications of the clamps, which differ in purpose.
-
Press-clamp PV-450/600
₴78 580The press clamp for longitudinal splicing of wood PV-450, PV-600 is a modification of the PV-300 model. It is equipped with upper and side clamps that align and hold the workpiece. Allows for longitudinal splicing of lamellas for 3-layer timber, “lining”, door posts and floorboard blanks.
-
Press-clamp VE-10
₴29 350Press clamps type VE-10 are designed for gluing furniture boards, panels, stair steps up to 100 mm thick and three-layer timber. The workpiece is fixed relative to the base using sliding crossbars with screw clamps. For ease of use, the clamps are equipped with adjustable stops.
-
Press-clamp VE-12
₴29 260The VE-12 type press clamps are a modification of the VE-10 type clamps. They are used for the production of 3-layer timber, assembly of construction I-beams.
The increased width of the clamps (120 mm) also allows for gluing the lamella onto door posts.
The stroke of the main clamps is 40-60 mm. -
Press-clamp VE-16
₴36 690Press clamps type VE-16 are a modification of clamps type VE-10/12. The main purpose of this type of press clamp is industrial production of glued door risers and large-section joinery products.
-
Press-clamp VE-24
₴45 910Press clamps type VE-24 are a modification of clamps type VE-10. They are used for the production of 3-layer timber, gluing door risers with lamellas, production of 3-layer parquet boards, gluing timber up to 240 mm wide.
